Search results

Well giving the truck has never been washed in its 30 years of life rust def isn't an issue. Would it matter that the whole time there were left open so they weren't compressed?

can you buy new struts from you guys. I have a kit that is a couple years old. The struts where on the truck but no hood. Bowtie build takes a couple years. Anyway went to put hood on tonight and attached the struts and they are frozen open. I took them off and tried to compress on the bench and...

Re: Newly rebuilt Ty 92 #0021 Matt, Good to have you back we know that ty has a 9.99 pass in it.

Re: 9 sec Bowtie build Yeah I'm going to be running e85 but the stock location is very restrictive bc air flow and also heat soak from the hot pavement. But e85 or 98 will take care of that issue

Re: 9 sec Bowtie build So some told me I should update my build thread bc it will keep them motivated on there build. So here goes. I fitted the 5 inch intercooler in front of the radiator and still go it to fit behind the grilled without having to modify the grill in any way and that was...

Re: Ty 0073 Bowtie Build Mike just keep ur dipstick and changed the braided line in the center. I ordered the ed-5001 and it is no where long enough if I put it to a header bolt ur going to burn ur hand every time. I just bought me Teflon lined braided hose and made it longer the dipstick just...

Re: Engines done! dyno #'s Chad built my bowtie setup. Trust me he knows what he is doing. He took great with my setup and helped me through some issues

Re: Ty 0073 Bowtie Build Is that where ur returning the old from the turbo

Re: Ty 0073 Bowtie Build The an fitting right about ur timing chain cover what do you have that going to? I'm assuming water comes out if it or does oil?

Re: Syty Aluminum rear drums Where you located in nj

Re: Building Y indoor truck display I'm trying with every effort I have and every dollar on the money tree to get mine there and in the building

Re: 9 sec Bowtie build Well trans and transfer case are in the truck. Jsm crossmember needed to be moved forward in the truck 1 inch and now that is in also. The front propshaft is out getting lengthen and just have to take final measurements for the drive shaft

Re: Tuning in nj There are two guys I know of. Harry Anderson and you can also contact Paul Vaughn at Modern Muscle he is in Shsmong right near Atco raceway. Pm me for more info

Re: 9 sec Bowtie build Yeah I would say that if I had to do it over again I wouldn't do a bowtie build. Maybe I would use the bowtie block but just not the crabk. But in the end it will all be worth it or at least I hope so

Re: 9 sec Bowtie build Guess I never realized I didn't update this thread in so long. Well a lot has changed, once got the motor in we realized the headers were going to be a nightmare to work with. So out came those headers and went a set of RPM raised port headers for the Pontiacs. Along with...

Re: Bad ass Pic Time and $$$$HIT load of cash.

Re: Let's see your non stock wheels on a Sy/Ty Yeah these book for $700 something a wheel it's insane. I keep saying a set of Weld Rts (black face) in 18x12 in the back and 18x10 in the front would look sick on a Sy

Re: Let's see your non stock wheels on a Sy/Ty CCW Classics 18x10 and 18x12, 295 up front 335 out back

Re: Billet TH400 Adapters We cut 3/8 off the end of the th400 short shaft and have full engagement on the th400 splines in the 32 spline input shaft on the transfer case. No you will not be able to use the stock drive shaft or propshaft. Drive shaft will have to be shortened and the propshaft...

Re: Real Double-Din Mod Ok so he is going to run a special for the weekend $99.00 attached is the link. Just again he is telling me there is a 4 week turn around. Here is the link he will put up a pictures tomorrow. But it's the same as the first pic on this post...