Search results

Trying to set this thing to tdc so I can finally start it, but i cant get it to turn over. no tick, no power loss, no nothing. Only thing is every time i hit the key the speedo jumps a quarter inch or so. Truck has power, my fans and ic pump are working. I just redid the connection for the...

Anyone know off the top of their head the size bolts that affix the two brakets to the tailgate to swivel on the cups on the bed? Bad description, I know. theres on on each side and two on the bottom of the tailgate to hold each bracket on. Lost all 4:oops: during rebuild.

Anything in particular I need to do or watch out for when starting this thing up after siting for so long? I swapped in a stock low mile block, so it's been run before. So far all i can think of is prime fuel pump, set timing and check for leaks.

I have been trying for a couple days to get my cv axle out. I can't get this nut to budge for the life of me! Emptied half a can of pb blaster, heated it with a mini propane torch, hit a breaker bar with a hammer, tried to break the threads loose with a hammer and chisel. Any good ideas to get...

I'm installing an art carr torque converter but unlike the kenne bell i had on before, it doesn't have tapped holes for bolts in it. What's the best thing to use, same bolts but just get some nuts, or what? Thanks.

I have a set of 6 Oliver connecting rods out of my truck. Just got them back from the machine shop, checked out fine. I'm sure everyone knows about how stout these rods are, I don't believe any one has ever broken or bent one in a syty. These are the same rods McCoy used in their 291ci 1000hp...

I'm thinking about selling some rods that were used in my truck, but what can i do to make sure they are good to use again? Forged I-beam olivers that were mated to TRW pistons came out of my old block, but I really don't think I'm ever going to make enough power to need them. What do I need to...

I'm looking to get razors alky kit in the near future, but it doesn't look like he has a syty one on his site. Should I go with a universal or just buy the gn kit? Or does he have syty ones availible if you ask? Thanks.

I want to blow it up if I can find a color one, but it looks like a black and white mag or newspaper ad.

I'm about to do all the silicone vacuum lines and need some insight. I have no A/C, no egr, no vacuum ball, no cruise, and no fuel vapor canister. What all do I need to hook up? Just map--->T--->intake--->AFPR? I guess also plenum--->brake booster. I assume someone else has deleted all the...

anyone ever try this hurst hotshift tranny fluid?

I had to move my broke ass truck from my carport to my garage, but i have the front diff and cv axles out of it. when pushing it into the garage i had the wheels turned pretty far and i hear a SNAP. later i found the whole bearing was popped right out of the hub, now the disc is just being held...

I pulled this cam out of my old engine and I'm trying to find some specs on it. Has HR214/30/-25R-9 etched into it. Then has Crane 18-32-93 under that. Obviously a crane cam, but i don't know what any of that means on it. it also had the crane gold roller rockers on the heads.

Have some junk i need to get rid of before the remodel for my garage/carport. stock replacement fuel pump, used for about 5k miles-------------------------$35 w/free shipping broken front shaft, broke on cardin joint. made by dynatech, but a little beefier than...

Anyone around central Texas know of any tranny shops that rebuild torque converters? Its a 9/11 3500 stall and I don't wanna dish out a bunch of money for a new one, although I know the rebuild wont be cheap either.

pulled the converter out of the truck today, has kb400hsl stamped on it. Looks to be a 9/11 converter, but is this thing made by kenne bell or what? Never heard of it. Searched the forum, nuthin, but google came up with someone saying it was in their syclone and was a 9/11.

Ok guys I have a strange problem here. I'm trying to figure out what this means: My wastegate flapper is tack welded shut, I have no external and I ran my truck like this for over a year. in December I started hearing a loud ticking and now I'm tearing apart the block and putting a new one in...

I pulled apart the thought-to-be-stock block and found some goodies. Can anyone tell me what rods these are? They dont look like eagle h beams or stockers, I don't know what else to look for. I don't see any markings on them either other than the cylinder #s someone etched into each one. Thanks

Pulled off the manifolds and turbo today to swap to the new engine and found one of the bolts to the manifold was real oily, great smell of burnt oil. All the rest were dry and a little rusty where as this one was all oily and wet, along with the socket it came out of. Does that mean I cracked...

Who has the white on white I saw at lakeline mall on saturday night? I pulled up next to you at a stop sign and tried to talk, but you looked kind of scared of me :lol: so i just gave you a thumbs up. was a guy in his mid 30s maybe early 40s with at least one other person.