Recent content by 94c4lt1

Bump.... Surely someone can help.

Jason, Tadd and I were there watching you run that day! Congrats again. Not only was it the fastest syclone I have ever seen, but also it was the first one I have seen on the track! Uhh, but I believe bandimere is 5800 ft...but it doesn't matter. Very nice ride and congrats again. Scott

Hey guys, hopefully you can help me with this problem. We have a syclone and put in a 3 bar map sensor. Current mods: Td06 20g turbo, apfr, walboro, pitbull chip, etc. No boost is showing on the stock boost gauge. Current fuel pressure set to 45 lbs. Is it common with the 3 bar map sensor...

Actually guys, we decided (since the old cat is shot (wire screens are broken)), to just go with a stock replacement. ATR makes one for about $200. That is tons cheaper than the $450 GM replacement. And since my buddies and me know very little about wastegates we think this would be the...

Okay we are going to upgrade to an aftermarket catalytic converter and an aftermarket upgraded wastegate. Now what should we look for in a catalytic converter and upgraded wastegate? What kind should we get? Any help? Thanks

Hey guys, We are trying to remove the catalytic converter on a 91 syclone. We have the clamps off...but now we need some ideas on how to get it free from the exhaust pipes. We have tried using a steel pipe and pounding it with a hammer to push it off the pipe. Does anyone have any tricks or...

Hey guys, I have a quick question. The syclone has just had a adj fuel pressure regulator installed and I am not sure at what fuel pressure it should be set to. Can anyone help? The modifications are listed below: TD06 turbo walboro fuel pump pitbull chip borla exhaust Thanks

Maybe I am just dumb...By the "tv cable" do you mean the throttle cable? Sorry, Im confused....

Thanks for your guys' help in the past...I have a new problem now. For some reason the syclone shifts at 4k RPMs now under WOT. Anybody have any clues why this is happening and how to fix it. Recent modifications/Fixes: TD06 turbo New walbro fuel pump fuel pressure regulator New send fuel...

The chip in the car is a pitbull chip. Boost levels? Well the turbo just starts to spool in first when the fuel cuts out. So no boost during the fuel cut out. No check engine light. We repair the Code 43 that was popping up and now we still have this problem that doesn't throw a code. This...

Hey guys, Under WOT the fuel cuts out in 1st and second gear. Under powerbraking (or boost braking) the RPM's won't go higher than 1500 RPMs. Currently we have replaced/repaired (91 gmc syclone): New TDO6 turbo with new wastegate and lines running out of it (all double checked) Rebuilt...

Anybody got any ideas...please? Could it be the ignition coil? Any clue? Oh, and it pulls code 43... thanks,..

No, actually the truck doesn't stall and I am not sure if it is the fuel cutting out (I believe so, but it could be a misfire). Just when it hits about 1500 RPM under WOT it cuts out (no stall though), and when power braking it only hits 1500 RPMs and won't go any higher. We just replaced all...

Well, we got the knock sensor out and replaced it (PITA but what isn't when working on a syclone...tough with everything crammed in there), replaced the boost silenoid and did a full tune up! We are still having our problem, but we are replacing everything one part at a time. Basically what...