Recent content by 93 Ty

Guys, my Ty was stored for the winter and now it won't run right.It was not running completly before the storage. I'm tired of messing with it and now I can have an excuse to upgrade and make it faster. I need a shop in Colorado, Denver area that have done these trucks before. I know I can't do...

Re: 17x9.5 ZR1 thanks for all the replys. I was really hoping that I wouldn't need spacers. Steve

Re: 17x9.5 ZR1 Looked at the chart/scale but still not sure of the wheels. So, the front's will fit flush and the rear are going to stick out? is this right? Thanks, Steve

Hey all, did some research and know that pretty much if you want to have 17x9.5s on all four on a Ty without spacers you will need different offsets on front and back. I have a lady that is selling four ZR1's with 54mm on all four. If I put these on what will it look like? Thanks, Steve

Re: Foglights keep blowing dome light fuse Checked it out, used some steel wool and foglights back on. Thanks alot. Steve

Hey everyone, was just driving my Ty the other night and turned on my headlights and then foglights. When I turned on the foglights the fuse (20) for the dome light gets blown. Replaced the fuse and as soon as I turn the foglights on the fuse blows again. Foglights was in working condition...

Re: Will 18.9's wheels fit a dropped TY Camsty, so let me get this straight, how much will the rear still out without any spacers with the 56mm offset. With the 50mm offset will they barely stick out? thanks, Steve

Hey guys, thinking about buying a set of AFS wheels off ebay. Just want to clarify a couple of Q's before buying. My ty is dropped 2in front and 3 rear, will the wheels have any clearance problems (hitting cladding etc..) and also the wheels are 56mm offset all around. Do I need to request...

Re: Finally got her running Mike, nice to hear that you got the truck running again. Steve

Re: AC and Heater won't turn on Thanks guys, I'll check all that is mentioned and go from there. Steve Oh, SYTYGUY or others where is the A/C relay look like and located.

Re: AC and Heater won't turn on Guys, I assume that the blower motor is on the engine bay (passenger side). If not describe, please. Thanks, steve

Hi guys,did a search already but didn't clearly find a solution. My problem is that when I try to turn the AC, fan or heat on there is nothing. No blower or noise. What and where do I need to look. I checked the fuse under the dash and it's good. Is there a blower fuse, like the gray color...

Hey guys, just want to know what everyone uses to hold the fender cladding (front) to the vehicle . Mine is loose and can't think of anything. thanks, Steve

Mike, thanks for the help. Hey I just bought a shurflo pump. Guess what I will be doing these couple of weekends :rock: Dr. Evil, don't mean to hijack your thread

No, I took it back to the dealer and basically they told me what they did was what I asked for, which was not true. I complained to the service manager and of course he took their side. $1700 bucks later and not much has changed. Man, I'am getting angry typing this up. Thanks, Steve