Wide Band

[93 typhoon]

Hello every one...

I just bought a Wide Band Gaug-Type UEGO Controller from AEM. just wondering if any one has installed one. Because i am confuse with to wires. whit & blue. (white is Analog Output) & (blue is Serial Output) The installation say Connection of the white and blue wires is optional. do i connect them or not? if yes were do i connect them? I will appreciate the help guys. sorry guys this is new for me : :roll: I see no one answered. probably no one has used one of this wid band gaug.

www.summitracing.com Part # AVM-30-4100

 

[UR50SLO]

Re: Wide Band

Yes... I have one in the wife's Typhoon.....

All you need to hook up is the Red power and Black ground.

Tape off the ends of the blue and white for now.

You'll need them later for when the code 59 is out to the public.

Put the O2 bung in the down pipe... hook up the connector... and your done. It's realy very easy.

If you've got any questions about that I didn't cover e-mail me K?

UR50SLO@aol.com
Hope that helps, Scott~

 

[STAGEUP]

Re: Wide Band

What he said. I got an AEM wideband in my 05 GTO, and it works great! Im getting one for the Syclone I just got.

 

[gmcturbo]

Re: Wide Band

the anaolog wire is the one you would use with the wb "hack" that dig wrote that puts the info on the datastream and can be seen on scan tools like datamaster

 

[asrnj77]

Re: Wide Band

Sorry for reviving the super old posts but I installed an AEM UEGO and now that the hacks and code59 are up and about I need to know how to connect the analog to my ecm. Is it a ground to B9 and the white wire to F14 like the PLX?