58 mm ASM Throttle Body, Syclone Linkage? ---

[alwayscode390]

Hey Guys, I have a new Arizona Speed and Marine 58mm billet throttle body that I was going to use on the Syclone. The problem is it has a linkage for a 502 big block on it.

My original plan was to swap out the linkage to a Sy linkage ... would it just be easier to get the one that RPM sells thats already set up ... and just sell the ASM one?

Can the stock linkage be taken off my stock Throttle body and put on the ASM one easily?

Thanks ---

 

[ghettosled]

Re: 58 mm ASM Throttle Body, Syclone Linkage? ---

if you want to send me pics i can take a look and you might just be able to install our linkage to the ASM throttle body. would save you some $$.

 

[1madgumby]

Re: 58 mm ASM Throttle Body, Syclone Linkage? ---

Hey Guys, I have a new Arizona Speed and Marine 58mm billet throttle body that I was going to use on the Syclone. The problem is it has a linkage for a 502 big block on it.

My original plan was to swap out the linkage to a Sy linkage ... would it just be easier to get the one that RPM sells thats already set up ... and just sell the ASM one?

Can the stock linkage be taken off my stock Throttle body and put on the ASM one easily?

Thanks ---

I have A Arziona Speed 1050 throttle body. When I ordered it I told them it was for A sy/ty. Just send it back to them & they will change it over for ya. Don't think they will be A charge to do it eather.

 

[alwayscode390]

Re: 58 mm ASM Throttle Body, Syclone Linkage? ---

Thank you BOTH for the ideas!!! ---

 

[BoostedSUV]

Re: 58 mm ASM Throttle Body, Syclone Linkage? ---

I don't know about ASM but when I got my BBK it wasn't TY specific but I was able to unbolt the TV and cruise cable bracket of the stock TB and drill 2 holes in the BBK linkage and make it work fairly easy. Not sure if its a similar linkage setup to the BBK or not?